Valves, Spares & Tools - Inflation & PRV Pressure Release Valves

Simple screw-in replacement valve core with spring and diaphragm for repair or service of leaking Zodiac semi-recessed valves. The core can eithe...

We are currently out of stock of the Leafield Marine A7/B7 service kit. We do have a delivery due 16th September. If you wish to reserve this part,...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6 Pressure Relief valves, C7 valves and D7 type va...

To connect in the end of the pump / bellows hose to a Leafield Marine A4, A5, A7, B7, C7, D7 & A8 valves. Push fit into the valve To fit ei...

Complete Leafield Marine C7 inflate/deflate valve. The professionals choice! The C7 valve has become the favourite inflatable boat valve for use...

Complete Service kit for the Leafield Marine C7 valve. Available in 1s, 3s and 5s - often if one valve is leaking and needing a service kit, the o...

Zodiac Delrin valve core assembly fitted with 'o' ring seal together with cap and cap lanyard. 23mm diameter across the core thread.  Zodiac pa...

The Leafield A6 PRV is a well tested low profile pressure relief valve. Increasingly fitted by manufacturers to RIB and inflatable boat tubes, rive...

Pennel & Flipo Orca Hypalon valve doubler Critical item when replacing or repairing RIB inflation/deflation valves For RIBs, dinghies and...

Suitable for use with Halkey Roberts type inflation valves as fitted to Wetline, Walker Bay and many other inflatables, dinghies and RIBs. Fits ...

Rugged Pressure Gauge with adaptor for Leafield Marine A7, B7, C7 & D7 inflation deflation valves. Pressure reading 0-8.5psi (0-0.58bar) - i...

Screw-in valve as fitted to early Plastimo, Quicksilver, Maxxon and Yam. Also fits Avon Typhoons - typically these boats have blue valves Outsid...

Low profile spanner for installing or removing the male/screw-in section of the Leafield Marine A6 pressure relief valve or Leafield Marine B7 valv...

Replacement diaphragm for the Zodiac Delrin Valve as fitted to Zodiac dinghies and Bombard inflatables Zodiac part number Z2195 N.B. This diaphra...

Valve spanner for a range of Bravo valves (2000, 2001 & 2005), Halkey Roberts valves and Valiant/Ceredi Recessed valve. Required when tighten...

We are currently out of stock of the Leafield Marine A7/B7 service kit, but our delivery is due on 16th September. If you wish to reserve this pa...

Zodiac Semi Recessed Cap Gasket Zodiac part number Z6851

Valve key for removing and installing the screw-in male valve body 8 section valves as fitted to Waveline 2009 and 2010+ models & Halkey Robert...

This Bravo inflator hose adaptor for Bravo 2000 flush fit valves will also fit many other screw cap valves. Female connection to hose is for 16mm...

Leafield Marine A7 inflate / deflate Valve Fitted to older Avon, Narwhal, Ribtec RIB inflatable boats and dinghies and many other make of RIBs a...

Critical item when replacing or repairing RIB inflation/deflation valves For RIBs, dinghies and inflatable boats made from PVC Pre-cut to 150mm...

Leafield Marine A4 & A5 Valve Cup Diaphragm For an A4  replacement spring click here Leafield Marine part number: A10042

Halkey Roberts (new type 690NSBV) Supplied in Grey ** Note: Please check the valve model number located on the top of the outer section of the v...

Zodiac Semi Recessed Valve Inflate Adaptor 21mm diameter to fit snugly into valve With eyelet to tie to pump hose end To connect this Zodiac ada...